J&D Manufacturing brand Shutter Mounted Variable Speed Direct Drive Exhaust Fans

(Single/Variable Speed) Shutter Mount Direct Drive Wall Exhaust Fan CFM Range: 300 - 6,125 (12"-24")

ES SHUTTER FAN WITH or WITHOUT 10' CORD

J&D Manufacturing’s team of ventilation design engineers have taken our extremely popular ES Exhaust Shutter Fan and added a 10' cord for “No Electrician Required” installation. The ES fan consists of an agriculture grade, variable speed motor (12"–24") attached to an aluminum shutter with tie bar to eliminate shutter flapping and locking open. The motor is connected to the shutter with a heavy duty chrome plated OSHA approved guard. The fan is totally assembled at our factory so you just pull it out of the box and plug it in.

When it comes to transferring electrical energy efficiently, into air energy for cooling, air recirculation or air movement J&D Manufacturing is the world leader.

J&D Manufacturing exhaust fans when applied properly can be used in the following applications:

* Remove and control unwanted condensation
* Eliminate heat build–up inside your buildings
* Improve air quality
* Air Exchange
* Designed for agriculture, horticulture and industrial applications

When installing any J&D Manufacturing exhaust fan, you must provide a proper inlet. Give us a call to help you with a J&D approved inlet or control to go with your high performance exhaust fan. A properly designed J&D ventilation system will give you exceptional results.

Features & Benefits

* Unbelievable smooth and quiet operation
* Comes totally assembled out of the box
* No electrician required when ordered with a plug and plugged into a locally approved electrical circuit
* Aluminum blade with a zinc plated steel hub balanced for smooth vibration–free operation. Pitch is designed to correlate with motor horsepower to deliver maximum efficiency.
* Chrome grill allows for easy cleaning and meets OSHA guidelines. (OSHA approved on interior wall and approved on exterior wall when mounted 7' above ground.)
* 10’ Cord attached is wired for 115 Volt plug
* High efficiency aluminum shutters with tie bar to eliminate shutter flapping and opening on windy days
* Extremely energy efficient, totally enclosed, maintenance free, direct drive high efficiency motors have completely sealed ball bearings, UL and ULC certification, built in

automatic thermal overload protection, covered by a Full Two Year Warranty.

Cut Sheet (65.8 kb)

Installation Instructions (246 kb)

Part#

Size

Volt

Amps

Phs

Spd

CFM

@.0" SP

CFM

WATT

Hi/Low

@.05" SP

Noise

Hi/Low

RPM

Hi/Low

Blade

Rough

Opening

Shutter

VES12

12"

1/10

115

1.0

S/Var

1,846

9/7

56/50

1625/600

3-Alum

12.5"x12.5"

Alum

VES161

16"

1/10

115

1.0

S/Var

2,951

12/9

56/50

1625/600

3-Alum

16.5"x16.5"

Alum

VES201

20"

1/10

115

1.0

S/Var

3,233

12/10

58/52

1625/600

3-Alum

20.5"x20.5"

Alum

VES20

20"

1/3

115

3.5

S/Var

5,077

13/10

58/52

1725/600

3-Alum

20.5"x20.5"

Alum

VES24

24"

1/2

115

4.8

50/60

S/Var

6,487

17/14

60/54

1725/600

3-Alum

24.5"x24.5"

Alum

VES30

30"

1/2

115

5.1

50/60

7,086

13/11

N/A

844

3-Alum

30.5"x30.5"

Alum

DD - Direct Drive

Options:


JDMV1-C - Manual Variable Speed Control w/Cord	JDS10-C - Automatic Temperature Adjusting Variable Speed Control w/Cord	VC115-C - Single Stage Moisture Proof (Piggy Back) Thermostat Control w/Cord	VC115 - Single Stage Moisture Proof Thermostat Control
VC141 - Single Stage Digital Thermostat	JDMV1 - Manual Variable Speed Control	JDS10 - Automatic Temperature Adjusting Variable Speed Control	Model #VFT Weather Hood
Model #CN25 - 2.5 Amp Variable Speed Control	Model #CN5 - 5 Amp 120V Variable Speed Control	Model #VFT130144 - 10 Amp 120V Variable Speed Control	Motorized Aluminum Intake Power Shutter