Your shopping cart is currently empty.
Exhaust Fans → Wall Mount Exhaust Fans → Canarm Ltd. brand BTA, WTA & HTA - Belt Drive Industrial Inline Tube Axial Duct Fan CFM Range: 20,690-75,110 (42"-60" Dia.) High Heat and High Moisture Models Available - Single Phase and Three Phase
Canarm Ltd. brand BTA, WTA & HTA - Belt Drive Industrial Inline Tube Axial Duct Fan CFM Range: 20,690-75,110 (42"-60" Dia.) High Heat and High Moisture Models Available - Single Phase and Three Phase
Price:
$2,930.04
Price:
$2,783.16
Price:
$3,187.62
Price:
$2,878.74
Price:
$3,414.42
Price:
$2,973.24
Price:
$3,892.32
Price:
$3,141.18
Price:
$5,082.35
Price:
$4,639.14
Price:
$4,489.02
Price:
$4,181.76
Price:
$4,717.98
Price:
$4,278.96
Price:
$5,203.98
Price:
$4,452.84
Price:
$6,282.09
Price:
$44,604.78
Price:
$5,385.33
Price:
$6,904.22
Price:
$6,492.05
Price:
$7,297.04
Price:
$6,636.22
Price:
$8,470.99
Price:
$6,795.15
Price:
$7,591.72
Price:
$7,861.39
Price:
$7,158.18
Price:
$8,998.70
Price:
$5,513.20
Price:
$8,173.12
Price:
$8,503.32
Belt Drive Tube Axial Duct Fan |
Canarm Ltd.
brand belt drive tube axial duct fan are designed for duct connected
applications such as paint booth exhaust, air make-up fans and general
exhaust applications. Canarm Ltd. offers a wide range of sizes, horsepower and performance levels to fit your application requirements. Rated from 2,100 CFM to 75,110 CFM with static pressure capable to 1-1/2". They are used to exhaust air from or supply air to commercial and industrial applications, such as general building ventilation, enclosed garages, paint spray booths, heat and smoke ventilation systems and other applications where the air is moved through a duct system against moderate static pressure. |
Model BTA - For clean, dry air with a maximum temperature of 200ºF (95ºC). • Adjustable motor base. • Heavy duty pillow block ball bearings with high temperature grease. • Extended lube lines with external grease fittings. • TEFC motors are standard. • Cast aluminum blades up to 48”; fans 54” & 60” have polypropylene reinforced fiberglass blades. • Airfoil shaped belt tube for improved efficiency; motor, belts, drives and bearings are isolated from air stream. |
Model WTA - For moisture laden air with a maximum temperature of 200ºF (95ºC). • Heavy duty pillow block bearings with moisture displacement collars. |
Model HTA - For clean, dry air with a maximum temperature of 375ºF (190ºC). |
Printable Cut Sheet and Detailed Performance Chart (259 Kb) |
Operation & Maintenance Manual (BTA, WTA, HTA, DDA.pdf) (494 Kb) |
For three phase motors, substitute "*" with "M" for 230/460 volt (If 208V or 575V is required please specify in order notes). dBA ratings shown are measured at 0" static pressure and should be used as a guideline only. These fans are made to order and cannot be cancelled. Canarm Ltd. brand Models BTA42T10200, BTA42T30200M, BTA42T10300, BTA42T30300M, BTA42T10500, BTA42T30500M, BTA42T10750, BTA42T30750M, BTA42T11000, BTA42T31000M, BTA48T10300, BTA48T30300M, BTA48T10500, BTA48T30500M, BTA10750, BTA48T30750M, BTA48T11000, BTA48T31000M, BTA48T31500M, BTA54T10500, BTA54T30500M, BTA54T10750, BTA54T30750M, BTA54T11000, BTA54T31000M, BTA54T31500M, BTA60T10750, BTA60T30750M, BTA60T11000, BTA60T31000M, BTA60T31500M, BTA60T32000M |
Customer Reviews
(0.00)stars out of 5
# of Ratings: 0
(Only registered customers can rate)
Related Products
9 Total Related Products